Home | AD2002/4 Injector System | Soft Bag Injectors | Technical characteristics and size
Disposable Catalogue | Service Options | Contact Us
| Technical characteristics and size | Tuesday, March 9th 2010 |
AD2002-CT/ANGIO
| Technical Characteristics | AD2000-CT | AD2000-ANGIO |
| Syringe volume | 200 ml | 130 ml |
| Flow rate | 0.1 to 10 ml/s | 0.1 to 20 ml/s |
| Maximum pressure | 2500 kPA/350 PSI | 7000 kPA/1200 PSI |
| Rising time | 0.4 s | 0.1 to 2 s |
| Number of sequences | 4 | 2 + repetition |
| Delay | 0 to 999 s | 0 to 999 s |
| Time | yes | yes |
| Handswitch | 2 | 2 |
| Heating jacket | option | option |
| Perfusion arm | yes | option |
| Specific software | specif. scan. | specif.angio. |
| SIZE | DIMENSIONS | WEIGHT | ||
| width | depth | height | ||
| Control console | 275 mm | 202 mm | 220 ml | 2.6 kg |
| Syringe head | 192 mm | 330 mm | 120 ml | 9.8 kg |
| Electronics housing | 320 mm | 250 mm | 115 ml | 7.2 kg |
| ||||||
|
SBI~5000-CT & SBI~2500-MR | ||||||
| Technical Characteristics | SBI~2500-MR | SBI~5000-CT |
| Max volume (pre-filled) contrast | 250ml | 500ml |
| Max volume (pre-filled) saline | 250ml | 250ml if dual fluid |
| Empty soft bag sizes | 250ml | 100ml-200ml-500ml |
| Flow rate (increments 0.1) | 1 to 10 ml/s | 1 to 10 ml/s |
| Maximum pressure | 2100 kPA/300 PSI | 2100 kPA/300 PSI |
| Maximum programmable volume | 200ml | 200ml |
| Rising time | 0.4 s | 0.4s |
| Number of sequences | 2 | 4 |
| KVO | yes | yes |
| Delay | 0 to 999 s | 0 to 999 s |
| Time | yes | yes |
| Start switch | 2 | 2 |
| Heating jacket | option | option |
| Specific software | specif. MRI | specif. CT |
| SIZE | DIMENSIONS | WEIGHT | ||
| width | depth | height | ||
| Control console | TBC | TBC | TBC | TBC |
| Injector head | TBC | TBC | TBC | TBC |
| Electronics/Hydraulic control unit | TBC | TBC | TBC | TBC |
| ELECTRICAL STANDARDS | |
| Voltage | 230 VAC 50/60 Hz |
| Power | 2 amp |
Ceiling mount of the injector head is one of the options you have.
